Company news

The TD-3700 high-resolution X-ray diffractometer, with all the advantages of the TD-3500 X-ray diffractometer, is equipped with a high-performance array detector. Compared to scintillation detectors or proportional detectors, diffraction calculation intensity can be increased by several tens of times, and complete high-sensitivity, high-resolution diffraction patterns and higher counting intensity can be obtained in a shorter sampling period. The TD-3700 high-resolution X-ray diffractometer supports both conventional diffraction data scanning and transmission data scanning methods. The resolution of transmission mode is much higher than that of diffraction mode, which is suitable for structural analysis and other fields. Diffraction mode has strong diffraction signals and is more suitable for routine phase identification in the laboratory. In addition, in the transmission mode, the powder sample can be in trace amounts, which is suitable for data acquisition in cases where the sample size is relatively small and does not meet the requirements of diffraction method for sample preparation.

The TD series diffractometer embodies the essence of Tongda Technology's research and development over the years, evolving with the demands of the times. X-ray diffractometer is mainly used for phase qualitative and quantitative analysis, crystal structure analysis, material structure analysis, crystal orientation analysis, macroscopic or microscopic stress determination, grain size determination, crystallinity determination, etc. of powder, block or film samples. The TD-3500 X-ray diffractometer produced by Dandong Tongda Technology Co., Ltd. adopts imported Siemens PLC control, which makes the TD-3500 X-ray diffractometer have the characteristics of high accuracy, high precision, good stability, long service life, easy upgrade, easy operation and intelligence, and can flexibly adapt to testing analysis and research in various industries! Angle measuring instrument with hollow shaft structure

A high-precision X-ray single crystal diffractometer designed specifically for materials science research, crystal structure analysis, and industrial quality control. It utilizes the diffraction effect generated by the interaction between X-rays and single crystals to provide users with detailed crystal structure information by accurately measuring diffraction angles and intensities, thereby revealing the microstructure and properties of materials.

X-ray tubes specifically designed for analytical instruments： 1. There are various types of target materials: different target materials can be selected according to different analysis needs, such as tungsten, copper, cobalt, iron, chromium, molybdenum, titanium, etc. These target materials can generate X-rays with different characteristics to adapt to the analysis of various substances. 2. Rich focus types: There are multiple focus types to choose from, such as fine focus, which can meet the testing requirements of different resolutions and accuracies. For example, fine focal points of 0.2 × 12mm ², 1 × 10mm ², or 0.4 × 14mm ² can help improve the accuracy and precision of analysis. 3. High output power: A high output power can ensure that the X-ray tube has sufficient energy to excite the sample during operation, thereby obtaining clear analysis results. The output power of some specialized X-ray tubes can reach 2.4kW or 2.7kW. 4. Special structural materials: corrugated ceramic tubes, metal ceramic tubes, glass tubes and other materials are used, which have good high temperature resistance, corrosion resistance and radiation resistance, ensuring stable operation of X-ray tubes in complex working environments. At the same time, these materials also help improve the heat dissipation performance of X-ray tubes and extend their service life. 5. Customized services: Customers can customize according to their specific needs, including the design, configuration, and anode materials of the radiation tube, to meet specific analysis requirements. 6. High reliability: The X-ray tubes used by Dandong Tongda Technology Co., Ltd. ensure a reliable supply of X-ray tubes, ensuring the continuous provision of high-quality X-ray tubes during the instrument's service life and reducing instrument downtime caused by tube failures. 7. Widely applicable: Suitable for various models of XRD (X-ray diffractometer), XRF (X-ray fluorescence spectrometer), crystal analyzer, orientation analyzer and other analytical instruments at home and abroad, as well as industrial fields such as non-destructive testing, inspection, measurement, etc. In summary, X-ray tubes specifically designed for analytical instruments have the characteristics of diverse target materials, rich focal points, high power, special structural materials, customizability, high reliability, and wide applications. These features enable them to meet the analysis needs of various complex substances and are widely used in scientific research, industry, and other fields.

A monochromator is a component installed in front of an X-ray detector, which monochromatizes the X-rays passing through a receiving slit and only detects K α characteristic X-rays in the X-ray spectrum. By using this device, continuous X-rays, K β characteristic X-rays, and fluorescent X-rays can be completely eliminated, enabling high signal-to-noise ratio X-ray diffraction analysis. When copper target X-ray tubes are used in conjunction with corresponding monochromators, fluorescent X-rays generated from Mn, Fe, Co, Ni based samples can be eliminated, making them suitable for analysis of various samples. The use of graphite bent crystal monochromator can improve the peak to background ratio, reduce the background, enhance the resolution of weak peaks, achieve a reflection efficiency of n ≥ 35%, and reduce the diffraction angle of the diffractometer. Embedding degree ≤ 0.55; The crystal surface can tilt ± 2 degrees.

X-ray absorption fine structure spectrometer is a powerful tool for studying the local atomic or electronic structure of materials, widely used in popular fields such as catalysis, energy, and nanotechnology. XAFS core advantages: Highest luminous flux product: Photon flux exceeding 1000000 photons/second/eV, with spectral efficiency several times higher than other products; Obtain data quality equivalent to synchrotron radiation Excellent stability: The stability of monochromatic light intensity of the light source is better than 0.1%, and the energy drift during repeated collection is less than 50 meV 1% detection limit: High luminous flux, excellent optical path optimization, and excellent light source stability ensure high-quality EXAFS data is obtained even when the measured element content is>1%。

The in-situ battery accessory is a component of the X-ray diffractometer accessories.In situ battery accessories are widely used in electrochemical systems containing composite materials such as carbon, oxygen, nitrogen sulfur, and metal inserts. Test range: 0.5-160 degrees Celsius Temperature resistance: 400 ℃ Beryllium window (polyester film) size: diameter 15mm (customizable); Thickness 0.1mm (customizable) Dandong Tongda Technology Co., Ltd. is a professional manufacturer of X-ray diffractometers、Wholesaler of X-ray directional analyzer、Wholesaler of X-series X-ray crystal analyzer。

The NDT non-destructive testing instrument is a small X-ray generator with an anode grounded and forced cooling by a fan; Dandong Tongda Technology's customized wholesale non-destructive testing instruments are lightweight, easy to carry, and easy to operate; Portable welding seam X-ray machine non-destructive testing instrument works and rests in a 1:1 ratio; Radiographic testing equipment: aesthetically pleasing and structurally sound; NDT non-destructive testing instruments are: delayed exposure to ensure operator safety; The main purpose of NDT non-destructive testing equipment is to inspect the processing and welding quality of materials and components such as ship hulls, pipelines, high-pressure vessels, boilers,aircraft,vehicles, and bridges in industrial sectors such as national defense,shipbuilding, petroleum,chemical,mechanical,aerospace,and construction,as well as internal defects and the inherent quality of various light metals, rubber, ceramics, etc.

Today, diffractometer has become an important tool in scientific research, education, medical and other fields. However, the precision and complexity of the diffractometer makes it necessary to take extra care during transportation and packaging.

Dandong Tongda Science and Technology Co., Ltd. is a leading manufacturer of X-ray analysis and non-destructive testing equipment. As a national high-tech enterprise, we provide cutting-edge products like TD-series X-ray diffractometers and automated sample changers. Our customer-centric philosophy ensures comprehensive pre-sales, during-sales, and after-sales support, including technical consultations, professional training, and lifelong maintenance. We deliver complete solutions for materials science, industrial production, and environmental monitoring, backed by a reliable service system. Contact: +86-415-6123805 / firefly@tongdatek.com